1. From the Add Roles and Features Wizard, under Server Roles, select File and Storage Services (if it has not already been installed).
2. Select the File Services check box, and then select the Data Deduplication check box.
3. Click Next until the Install button is active, and then click Install.

1. Start Windows PowerShell. Right-click the Windows PowerShell icon on the taskbar, and then click Run as Administrator.
2. Run the following Windows PowerShell commands:
   Copy

   PS C:> Import-Module ServerManager
   PS C:> Add-WindowsFeature -name FS-Data-Deduplication
   PS C:> Import-Module Deduplication

1. From the Server Manager dashboard, right-click a data volume and choose Configure Data Deduplication. The Deduplication Settings page appears.
2. Select the Enable data deduplication check box, enter the number of days that should elapse from the date of file creation until files are deduplicated, enter the extensions of any file types that should not be deduplicated, and then click Add to browse to any folders with files that should not be deduplicated.
3. Click Apply to apply these settings and return to the Server Manager dashboard, or click the Set Deduplication Schedule button to continue to set up a schedule for deduplication.

1. To enable deduplication on a volume, run the following Windows PowerShell command on the server. In this example deduplication is enabled on volume E.
   Copy

   PS C:> Enable-DedupVolume E:

2. Optionally, set the minimum number of days that must pass before a file is deduplicated by using the following command.
   Copy

   PS C:> Set-Dedupvolume E: -MinimumFileAgeDays 20

   If you set MinimumFileAgeDays to 0, deduplication will process all files, regardless of their age. This is suitable for a test environment, where you want to exercise maximum deduplication. In a production environment, however, it is preferable to wait for a number of days (the default is 5 days), because files tend to change a lot for a brief period of time before the change rate slows. This allows for the most efficient use of your server resources.

The Data Deduplication feature comes with built-in jobs that will automatically launch and optimize the specified volume(s) on a regular basis. Optimization jobs deduplicate data and compress file chunks on a volume per the policy settings. After the initial optimization is complete, optimization jobs run on the files that are included in the policies, according to the job schedules that you have configured or the default job schedules that ship with the product.

You can trigger an optimization job on demand in Windows PowerShell by using the Start-DedupJob cmdlet. For example:

PS C:> Start-DedupJob –Volume E: –Type Optimization

This command returns immediately and the job is launched asynchronously. If you want the job to complete at a later time , add the –wait parameter, like this:

PS C:> Start-DedupJob E: –Type Optimization -Wait

You can query the progress of the job on the volume by using the Get-DedupJob cmdlet:

PS C:> Get-DedupJob

The Get-DedupJob command show current jobs that are running or are queued to run.

You can query the key status statistics including the achieved savings on the volume by using the Get-DedupStatus cmdlet:

PS C:> Get-DedupStatus | f1

The Get-DedupStatus command shows the free space, space saved, optimized files, InPolicyfiles (the number of files that fall within the volume deduplication policy, based on the defined file age, size, type, and location criteria), and the associated drive identifier.

Note
You can also view the deduplication savings in Server Manager on the Volumes page. From Server Manager, click File Services, and then click Volumes. Right-click the column heading to add Deduplication Savings.

Optimization job queuing

Optimization jobs are started in the following order:

1. Preemptive (manually run jobs that are not scheduled)Any manual jobs that include the –Preempt option will terminate any jobs that are currently running, and start immediately. (Note that the –Preempt option is ignored in scheduled jobs.)
2. StopWhenSystemBusy parameterJobs that contain this parameter will stop if resources are not available to run the job without interfering with the server’s workload.
3. PriorityAmong jobs that do not have the same StopWhenSystemBusy setting, high priority jobs are queued first, normal jobs are queued second, and low priority job are queued last.
4. Manual or scheduledManual jobs are queued before scheduled jobs.

Memory settings are not considered as part of the optimization job queue algorithm.

Optimization metadata

Metadata provides you with evidence about savings that you gleaned from using optimization. There are three cmdlets that output this metadata: Update-DedupStatus, Get-DedupMetadata, and Measure-DedupFileMetadata. This metadata can help you assess the impact of some optimization configuration options.

Update-DedupStatus returns the following metadata:

Get-DedupMetadata returns the following metadata:

Data Deduplication has built-in data integrity features such as checksum validation and metadata consistency checking. It also has built-in redundancy for critical metadata and the most popular data chunks. As data is accessed or jobs process data, these features may encounter corruption, and they will record the corruption in a log file. Scrubbing jobs use these features to analyze the chunk store corruption logs, and when possible, to make repairs. Possible repair operations include using three sources of redundant data:

1. Deduplication keeps backup copies of popular chunks when they are referenced over 100 times in an area called the hotspot. If the working copy is corrupted, deduplication will use the backup.
2. When using Storage Spaces in a mirrored configuration, deduplication can use the mirror image of the redundant chunk to serve the I/O and fix the corruption.
3. If a file is processed with a chunk that is corrupted, the corrupted chunk is eliminated, and the new incoming chunk is used to fix the corruption.

Scrubbing jobs output a summary report in the Windows event log located here:

Event ViewerApplications and Services LogsMicrosoftWindowsDeduplicationScrubbing

Data Deduplication defaults create a data integrity scrubbing job on a weekly basis, but you can also trigger one on demand by using the following command:

PS C:> Start-DedupJob E: –Type Scrubbing

This initiates a job that attempts to repair all corruptions that were logged in to the deduplication internal corruption log, during the I/O to deduplication files. To check the data integrity of all the deduplicated data on the volume, use the -full parameter:

PS C:> Start-DedupJob E: –Type Scrubbing -full

Also known as Deep Scrubbing, the -full parameter will scrub the entire set of deduplicated data and look for all corruptions that are causing data access failures.

Data Deduplication includes garbage collection jobs to process deleted or modified data on the volume so that any data chunks no longer referenced are cleaned up. Garbage collection jobs process previously deleted or logically overwritten optimized content to create usable volume free space. When an optimized file is deleted or overwritten by new data, the old data in the chunk store is not immediately deleted.

Note
Garbage collection is a processing-intensive operation, so you should allow the deletion load to reach a threshold and then manually run this job type, or schedule it for off hours.

Garbage collection can also be triggered on demand. For example:

PS C:> Start-DedupJob E: –Type GarbageCollection

This command removes unreferenced chunks and compacts containers that have more than 5% unreferenced data. By adding the –full parameter, the job will compact all containers to the maximum extent possible. For example:

PS C:> Start-DedupJob E: –Type GarbageCollection -full